For mid-size hole drilling (up to 1 inch diameter) in concrete, you can't beat the MILWAUKEE Hawk® Rotary Hammer. The D style rear handle offers the operator a secure comfortable grip and a two finger speed control trigger switch. Speed control allows smooth controlled starts and less bit walk for accurate hole positioning. Reversing feature allows the operator to reverse motor to aid in freeing a jammed bit. The Hawk® accepts SDS-Plus style bits up to 1 inch diameter. The Hawk® can drill with ease, up to 3-1/2 inch holes in concrete using thin wall Core Bits. At 7-1/2 pounds, the operator can drill continuous holes without undue fatigue. A slip clutch stops rotary action when a bit jams protecting the mechanism from overload. Easy bit changes are handled with pull back/release locking collar.
|
|
 |
|
|
1 in. solid bit capacity in concrete, 3-1/2 in. thin wall core bit capacity, SDS-Plus Drive |
|
|
|
Trigger speed control: 0-900 rpm, 0-4500 bpm, reversing |
|
|
|
Powerful 6.8 amp |
|
|
|
Two modes of operation: hammer with rotation or rotation only |
|
|
|
|
|
 Voltage |
120 AC |
|
Amps |
6.8 |
|
No Load Speed |
0-900 RPM |
|
No Load BPM |
0-4,500 |
|
Blow Energy |
2.0 ft.-lbs. |
|
Cord Type |
8 ft. Fixed |
|
Drilling Mode |
Rotation Only |
|
Handle Style |
D-Handle |
|
Vibration Reduction |
No |
|
Clutch |
Yes |
|
Solid Bit Capacity |
1 in. |
|
Thin Wall Core Bit Capacity |
3-1/2 in. |
|
Length |
14 in. |
|
Tool Weight |
7.5 lbs. |
|
Shipping Weight |
15.0 lbs. |
|
|